			Greyscale FX
How to use Greyscale FX:
Step 1:Draw a picture on the graphscreen. You don't have to save it,
but it cannot be over 1000 pixels. (about 1/5 the graph screen)
Step 2:Run progFX
Step 3:Choose the Load Data command from the menu. Scanning the graph
screen will take approximately 5 minutes. (I like to listen to the 
radio during this time)
Step 4:Choose Shading command from the menu. The direction is the 
direction that will be darkened in. D=Down, R=Right, U=Up, L=Left,
UL-LR=Upper Left to Lower Right, UR-LL=Upper Right to Lower Left,
LR-UL=Lower Right to Upper Left, and LL-UR=Lower Left to Upper Right.
Step 5:Choose Degree of Grey command from the menu. 0 meaning having no
grey and 9 meaning having maximum grey. (Depending on the Degree of 
Grey choosen, you may use up 1-10 pics on your calc. 0=Pic 1, 1=Pic1
and 2, 2=Pic1,2,and 3...)
Step 6:Choose Assemble command from the menu. This won't take quite as
long as the scanning, but it takes a little time depending on the 
number of pixels used.
Step 7:Choose Quit coammand from the menu. 
Step 8:Run progFXPLAY to view your greyscale marvel!

lzreye@aol.com
Nick Johnston